Donut Shape Polymer Clay Cutter
or 4 fortnightly payments More info
Donut clay cutter pack of 6 | Polymer Clay Cutter set | Shape Cutter | Unique clay cutter | DIY Craft tools | DIY Jewelry |
●● DESCRIPTION ●●
– The cutting edge is less than 1 mm thick to get a clean so that the after cleanup is to a minimal. It is expected that a small amount of sanding of your polymer clay piece is required after using these cutters.
To View Similar Clay Cutters → Click Here
To View Pattern texturing tools for clay → Click Here
●● RECOMMENDATIONS ●●
– A stiffer clay would be easier to work with while cutting out the clay with 3D printed cutters to get a firm cutout edge.
– If you are living in a hot and humid climatic condition, then sometimes your clay can sticky. To avoid your clay getting stuck inside the cutters, place a piece of cling wrap on top of your roller out clay and then use the cutters to cut out the shapes. Or you could also work your clay with corn flour or polymer clay powder before pressing the cutters into the clay
– Apply pressure firmly and evenly on to the cutters to press down the clay to cut all the way through. Don’t apply sideways pressure as this would distort the clay shape.
– Make sure to trim the edges if there is any excess before backing so that you spend less time sanding the pieces.
●● CARE ●●
– Hand wash at normal or light warm water
– Before washing, You can use a sharp object to remove clay stuck in the cutters into any intricate corners or gaps
– Do not expose or store the cutters next to high temperature
Thank you so much for supporting a small business. Please do reach out to me if you have any concerns or questions.