Polymer Clay Cutters – Organic Shape of 3 cutters

Organic Polymer Clay Cutters | Shape Cutter | Organic clay cutter | Earring clay cutter

DESCRIPTION

– The cutting edge of the Polymer Clay Cutters for earrings is less than 1 mm thick to get a clean cut so that the after cleanup is to a minimum. It is expected that a small amount of sanding of your polymer clay piece is required after using these cutters.
– They are available in 2 size variations – SMALL and LARGE

CUTTER HEIGHT SELECTION

– Usually, clay earrings are made at 3mm to 4mm thickness so 10mm deep cutters are sufficient for cutting the clay, But if you think you need more grip on your hands to hold the cutters then go for 15mm tall cutters.

To View Similar Clay Cutters → Click Here

RECOMMENDATIONS:

– Apply pressure firmly and evenly onto the cutters to press down the clay to cut all the way through. Don’t apply sideways pressure as this would distort the clay shape.
– Make sure to trim the edges if there is any excess before backing so that you spend less time sanding the pieces.

CARE INSTRUCTIONS:

– Hand wash at normal or light warm water
– Before washing, You can use a sharp object to remove clay stuck in the cutters into any intricate corners or gaps
– Do not expose or store the cutters next to high temperatures.

Hope you have fun getting creative.

Thank you so much for supporting a small business. Please do reach out to me if you have any concerns or questions by Clicking Here